Search results

Promoting electric vehicles (EVs) is an effective way to achieve carbon neutrality. If EVs are widely adopted, this will undoubtedly be good for the environment. The purpose of this study is to analyze the impact of network externalities and subsidy on the strategies of manufacturer under a carbon neutrality constraint.

In this paper, the authors propose a game-theoretic framework in an EVs supply chain consisting of a government, a manufacturer and a group of consumers. The authors examine two subsidy options and explain the choice of optimal strategies for government and manufacturer.

First, the authors find that the both network externalities of charging stations and government subsidy can promote the EV market. Second, under a relaxed carbon neutrality constraint, even if the government’s purchase subsidy investment is larger than the carbon emission reduction technology subsidy investment, the purchase subsidy policy is still optimal. Third, under a strict carbon neutrality constraint, when the cost coefficient of carbon emission reduction and the effectiveness of carbon emission reduction technology are larger, social welfare will instead decrease with the increase of the effectiveness of emission reduction technology and then, the manufacturer’s investment in carbon emission reduction technology is lower. In the extended model, the authors find the effectiveness of carbon emission reduction technology can also promote the EV market and social welfare (or consumer surplus) is the same whatever the subsidy strategy.

The network externalities of charging stations and the subsidy effect of the government have a superimposition effect on the promotion of EVs. When the network effect of charging stations is relatively strong, government can withdraw from the subsidized market. When the network effect of charging stations is relatively weak, government can intervene appropriately.

Comparing previous studies, this study reveals the impact of government intervention, network effects and carbon neutrality constraints on the EV supply chain. From a sustainability perspective, these insights are compelling for both EV manufacturers and policymakers.

As a strand in industrialization movement in architecture, engineering and construction (AEC) industry, prefabricated construction (PC) has gained widespread popularity due to high efficiency, energy saving, low environmental impacts, safety and other advantages of PC. Well-managed supply chain can further leverage the advantages of PC. However, there is a lack of more systematically overview of the prefabricated construction supply chain (PCSC). This paper aims to comb the current status and look into the future direction of PCSC by reviewing the existing research.

In total, 131 articles related to prefabricated construction supply chain management (PCSCM) from 2000 to 2022 have been collated to (1) conduct a bibliometric analysis by using VOSviewer, including the literature sources, keywords co-occurrence, co-authorships, authorship citation and country active in the field of PCSCM; (2) classify and summarize the status of research in PCSCM through qualitative discussion and (3) point out the future research directions.

In total, 131 articles are carried out for bibliometric analysis and in-depth qualitative discussion, the visualization maps and the main research themes in the field of PCSCM are obtained. The results show that supply chain intelligentization and informatization are hot topics. Finally, future research directions that should be paid attention to in the field of PCSCM are pointed out.

This study can help project managers understand the current status and problems of PCSC operations and provide a basis for future management decisions.

Compared with previous studies, this study adds the dimension of “article authorship” to the quantitative analysis and discusses the research themes in the field of PCSCM in a comprehensive manner. In addition, this paper deeply discusses the main research topics from both the specific contents and research methods adopted.

This paper aims to report a comprehensive analysis of literature on stakeholder relationships towards identifying patterns of relationships within the off-site construction context.

Key scholarly databases were accessed and after a filtering process, 74 relevant papers were retrieved for analysis. The papers were analysed using qualitative content analysis and scientometric techniques through the application of software Leximancer and VOSviewer.

Research synthesis methods used in the present study generate compatible results. Through text mining analysis, the key themes identified in the off-site construction stakeholder relationships literature included “collaboration”, “building information modelling”, “social network analysis”, supply chain. As a finding by scientometric analysis, collaboration, BIM, supply chain management, housing and social network analysis were the most frequently entered keywords context of off-site construction. Regarding authorship pattern, the whole network of collaboration was fragmented into multiple isolated clusters, implying that the authors had tendency to cooperate in small groups.

The paper can bring together an important area of research not previously studied in detail. It will primarily assist academics in the first instance; however, the research leads to important findings that will ultimately assist policymakers and practitioners better understand factors affecting stakeholder relationships and in particular network thinking and collaborative mind-sets.

The review contributes a needed systematic and theoretical foundation for future stakeholder relationship studies and practices in off-site construction sector. It provides the basis for future studies and is a seminal analysis of stakeholder management and off-site construction. The scientometric methodology offers scholars a different approach to analysing and visualising literature reviews.

This study aims to study the mechanical, photoelectric, and thermal reliability of SAC307 solder joints with Ni-decorated MWCNTs for flip-chip light-emitting diode (LED) package component during aging. By adding nanoparticles (Ni-multi-walled carbon nanotubes [MWCNTs]) to the solder paste, the shear strength and fatigue resistance of the brazed joint can be improved. However, the aging properties of Ni-modified MWCNTs composite solder joints have not been deeply studied. In this research, the mechanical, photoelectric and thermal reliability of SAC307 packaged flip-chip LEDs with Ni-MWCNTs added during aging were studied.

Compared with SAC solder alloys, the effects of different contents (0, 0.05, 0.1 and 0.2 Wt.%) of Ni-MWCNTs on the photoelectric and thermal properties of composite solder joints were examined. To study the aging characteristics of composite solder joints, the solder joints were aged at 85°C/85% relative humidity.

The addition of an appropriate amount of reinforcing agent Ni-MWCNTs reduces the density of the composite solder to 96% of the theoretical value of the SAC solder alloy. In addition, the microhardness increases and the wetting angle decreases. Two different phase compositions were observed in the solder joints with Ni-MWCNTs reinforcement: Cu₃Sn and (Cu, Ni)₆Sn₅. The solder joints of SAC307-0.1Ni-MWCNTs exhibit the highest luminous flux and luminous efficiency of flip-chip LED filaments, the lowest steady-state voltage and junction temperature. And with the extension of the aging time, its aging stability is the best. In short, when the addition amount of Ni-MWCNTs is 0.1 Wt.%, the solder joints exhibit the best wettability and the thinnest intermetallic compound layer. And the shear strength of the tested solder joints is the best, and the void ratio is the lowest. At this time, the enhancement effect of Ni-MWCNTs on the composite solder has been best demonstrated.

The content range of enhancer Ni-MWCNTs needs to be further reduced.

The authors have improved the performance of Ni-modified MWCNTs composite solder joints.

Composite solder with high performance has great practical application significance for improving the reliability and life of the whole device.

The purpose of this paper is to develop a new composite solder to improve the reliability of composite solder joints. Nano-particles modified multi-walled carbon nanotubes (Ni-MWCNTs) can indeed improve the microstructure of composite solder joints and improve the reliability of solder joints. Although many people have conducted in-depth research on the composite solder of Ni-MWCNTs. However, no one has studied the performance of Ni-MWCNTs composite solder under different aging conditions. In this article, Ni-MWCNTs was added to Sn-Ag-Cu (SAC) solder, and the physical properties of composite solder, the microstructure and mechanical properties were evaluated.

In this study, the effect of different aging conditions on the intermetallic compound (IMC) layer growth and shear strength of Ni-modified MWCNTs reinforced SAC composite solder was studied. Compared with SAC307 solder alloy, the influence of Ni-MWCNTs with different contents (0, 0.1 and 0.2 Wt.%) on composite solder was examined. To study the aging characteristics of composite solder joints, the solder joints were aged at 80°C, 120°C and 150°C.

The experimental results show that the content of Ni-MWCNTs affects the morphology and growth of the IMC layer at the interface. The microhardness of the solder increases and the wetting angle decreases. After aging at moderate (120°C) and high temperature (150°C), the morphology of the Cu6Sn5 IMC layer changed from scallop to lamellar and the grain size became coarser. The following two different phase compositions were observed in the solder joints with Ni-MWCNTs reinforcement: Cu3Sn and (Cu, Ni)6Sn5. The fracture surface of the solder joints all appeared ductile dents, and the size of the pits increased significantly with the increase of the aging temperature. Through growth kinetic analysis, Ni-modified MWCNTs in composite solder joints can effectively inhibit the diffusion of atoms in solder joints. In short, when the addition amount of Ni-MWCNTs is 0.1 Wt.%, the solder joints exhibit the best wettability and the highest shear strength.

In this study, the effects of aging conditions on the growth and shear strength of the IMC layer of Ni modified MWCNTs reinforced SAC307 composite solder were studied. The effects of Ni MWCNTs with different contents (0, 0.1 and 0.2 Wt.%) on the composite solder were examined.

This study aimed to examine the impact of servant leadership on employees' perception of organizational reputation by investigating the sequential mediating effects of employee psychological empowerment and employee thriving at work.

A quantitative online survey with 357 employees from Chile was conducted in this study.

Findings of this study showed that servant leadership both directly and indirectly relates to perceived organizational reputation. Employees perceiving servant leadership behaviors from the employees' supervisors report higher levels of psychological empowerment and, in turn, feel a greater sense of vitality and learning at work that eventually leads to higher ratings of perceived organizational reputation.

This study's novelty lies in extending the internal drivers of organizational reputation by adding behavioral and psychological factors rarely explored in past research.

In light of the lack of subjective criteria and scientific rationality in current sustainability performance assessment, the purpose of this paper is conducted to improve the sustainability performance assessment of high-tech firms by developing a hybrid approach that integrates quantitative and qualitative research methods.

This study proposed a hybrid approach that integrates word frequency analysis, cluster analysis, grey theory and the decision-making and trial evaluation laboratory (DEMATEL) method. Specifically, this study identifies useful criteria using quantitative word frequency analysis as well as qualitative literature research. Then, cluster analysis is used to divide these criteria into different categories. Subsequently, this study applies the grey theory associated with the DEMATEL method to assess the sustainability performance of high-tech firms.

The results reveal that the socio-environment is an important aspect underlying the corporate sustainability performance of high-tech firms. Therefore, high-tech firms should enhance their pollution emission control capabilities and increase investment in energy-conservation and emission-reduction technologies to drive sustainable development. In addition, increasing green product sales revenue and improving the guiding capability of green consumption are core issues that firms must address.

This study assesses the sustainability performance of high-tech firms by applying a hybrid method. This method can be used to construct a framework for scientific sustainability performance assessment and to provide a clear direction for the sustainable development of firms.

The purpose of this study was threefold: (1) to measure farmers' health poverty, (2) to examine the effect of health vulnerability on health poverty and (3) to identify countermeasures that may alleviate health poverty in rural China.

This study built a health poverty measurement model based on the multi-dimensional poverty framework to evaluate farmers' health vulnerability. Further, this paper used an econometric model to assess the impact of health vulnerability on health poverty. The sample for this study comprised 1,115 rice farmers from Hubei province, China.

The medical affordability poverty ratio was 17.95%, where farmers in the low-income group faced severe medical affordability poverty (27.46%). Results from the multi-dimensional analysis showed that, the health poverty ratios were 17.95 and 30.50%, respectively. Our results indicated that climate change vulnerabilities, living habits, medical facilities and medical accessibility were positively related to health poverty, whereas the regular physical examinations reduced mental health poverty.

Based on this study's findings, we proposed that: (1) to address illness-induced poverty among members of the agricultural community, national and provincial strategies and programs grounded on a multi-dimensional health poverty framework ought to be formulated and implemented, (2) mechanisms of health knowledge exchange may facilitate the improvement of farmers' health status, (3) robust and comprehensive metrics should be employed to understand and improve farmers' ability to absorb and mitigate the negative health impacts and (4) the improvement in both quality and quantity for medical facilities and medical affordability in the rural areas should be key priorities in governmental-wide initiatives.

Existing studies for alleviating poverty caused by disease mainly focus on medical service support to those economic vulnerabilities after a disease happens. However, few studies have focused on the root causes of poverty caused by disease, particularly from the preventive perspective of health vulnerability. To fill this gap, this study, therefore, proposes the health poverty index and analyzes the impact of health vulnerability on health poverty.

Effective post-disaster communication is essential for destination marketing organizations to encourage visitors following natural disasters. This research aimed to analyze the impact of two typical types of post-disaster communication messages – solidarity messages and testimonial messages – on post-disaster visiting intention. This research proposes effective communication strategies for post-disaster destination marketing.

For the case of Jiuzhai Valley, China, which experienced market recovery after two years of rebuilding following a 2017 earthquake, this study designed three contextual experiments based on post-disaster communication scenarios on the Internet and social media to test the causal chain between recovery message types and post-disaster visiting intentions. The data were analyzed using analysis of variance, independent samples t-tests, and the bootstrap method.

The results indicate that both solidarity messages and testimonial messages evoked higher visiting intention than the no-message group. However, solidarity messages (vs testimonial messages) were more effective when shared on the destination management organization's official account than when they were shared on an influencer's account, with their effects being mediated by the symbolic – as opposed to the hedonic – value of tourist behavior.

Destination management organizations should actively carry out marketing communication through the Internet and social media for areas that have experienced disasters. Crisis communicators should consider inviting popular social media influencers to visit the destination and share their experiences to enhance market confidence, while also paying more attention to the operation of official social media accounts.

This study sheds light on the use of the Internet and social media as tools for post-disaster marketing. By expanding on post-disaster communication theory, this study fills a research gap regarding the effectiveness of tourism marketing strategies after a crisis.