Search results

This study aims to verify the respective and interactive effects of subnational formal and informal institutions (i.e. legal effectiveness and social trust) on foreign firm performance, and further identify the contingent factor (i.e. institutional experience) that moderates these relationships.

Drawing on the institutional-based view, this study develops several hypotheses that are tested using a comprehensive dataset from four main data sources. The authors’ unit of analysis is foreign firms operating in China. The authors ran ordinary least squares (OLS) regression model to investigate the effects. A series of robustness tests and endogeneity tests were performed.

The results show that both legal effectiveness and social trust at subnational level positively affect foreign firm performance respectively. Legal effectiveness and social trust at subnational level have complementary effect in promoting the performance of foreign firms. Foreign firm's institutional experience in target region of emerging economies host country strengthens the positive impact of subnational legal effectiveness on performance, but weakens the positive impact of subnational social trust on performance.

It is important to fully understand the impact of heterogeneous institutional environments of subnational regions in emerging economies on foreign firm performance, which would help foreign firm make a more suitable secondary choice decision of investment destinations at the subnational regional level.

First, drawing on institutional-based view, the authors incorporate the subnational formal and informal institutional factors to investigate their impacts on foreign firm performance by switching the attention from national level to subnational level in emerging economy host countries. Second, this research furthers existing studies by bridging a missing link between both subnational formal and informal institutional environments and foreign firms' outcomes. Third, the authors prove that the model of subnational formal and informal institutions in influencing foreign firms' performance is contingent on their institutional experience in target subnational region of emerging economy host country.

The purpose of this paper is to evaluate the trend of off-farm employment in rural China over the past four decades since the reform and opening-up.

Using two sets of panel survey data, the China National Rural Survey conducted in 2000 and 2008, and the China Rural Development Survey conducted in 2005, 2008, 2012 and 2016, this study offers a re-visit of China’s off-farm employment to give us the latest information about its evolution and whether rural labor markets have developed in a way that will allow them to facilitate the transformation of China’s economy more effectively. The evolution of off-farm employment is further examined through decomposition of types, destinations, industries, and population sub-groups as well as the change in the wage rate.

The data show the rapid increase in rural labor activities over the whole study period. Most notably, the authors findnd that a rapid rise in off-farm employment has continued even until after 2008 and into the mid-2010s, which is a time when some feared that macroeconomic conditions might keep rural residents on the farm or drive them back to the farm. In the disaggregation of labor market trends, the authors show that labor markets are acting consistently with an economy that is in transition from being dominated by agriculture to being dominated by other forms of production and with a population that is consistently becoming more urban.

The authors believe that the results will contribute positively to the exploration of answers to the question whether or not rural labor markets have developed in a way that will allow them to facilitate the transformation of China’s economy more effectively over the last four decades.

This study aims to investigate the impact and mechanism of new energy vehicle (NEV) information sources (IS) on mass consumers' purchase intentions (PIs) in China.

Around 902 valid questionnaires were collected using the questionnaire to analyze the different effects of three types of IS (official, interpersonal and commercial) on mass consumers' PIs. Besides, this study investigates the mechanisms by examining the mediating effect of perceived risk (PR) and the moderating effect of individual differences like age and education level.

The three types of NEV IS stimulate the PI of mass consumers, but there are some differences, with interpersonal information sources (IISs) having the strongest contribution, followed by official information sources (OISs) and commercial information sources (CISs) the least. Meanwhile, PR plays a mediating role in the effect of NEV IS on mass consumers' PIs, and age and education level moderate the influence paths. Specifically, the moderating effect of age mainly works on the negative impact of PR on PI, while education level moderates the influence of IS on PR.

This study contributes to filling the gaps in the current understanding of the role played by NEV IS in shaping consumer preferences and choices. It provides valuable insights for automotive manufacturers, policymakers and marketers to tailor their marketing strategies and improve information dissemination to effectively promote NEV adoption among mass consumers.

The purpose of this study is to regard winter heating as a quasi-natural experiment to identify the possible causal effects of winter heating on population mobility. However, there are scant research studies examining the effect of atmospheric quality on population mobility. There also exists some relevant research studies on the relationship between population mobility and environmental degradation (Lu et al., 2018; Reis et al., 2018; Shen et al., 2018), and these studies exist still some deficiencies.

The notorious atmospheric quality problems caused by coal-fired heating in winter of northern China have an aroused widespread concern. However, the quantitative study on the effects on population mobility of winter heating is still rare. In this study, the authors regard the winter heating as a quasi-natural experiment, based on the of daily panel data of 58 cities of Tencent location Big Data in China from August 13 to December 30 in 2016 and August 16 to December 30 in 2017, and examine the impacts of winter heating on population mobility by utilizing a regression discontinuity method.

The findings are as follows, in general, winter heating significantly aggravates regional population mobility, but the impacts on population mobility among different cities are heterogeneous. Specifically, the effects of winter heating on population mobility is greater for cities with relatively good air quality, and the effects is also more obvious for big and medium-sized cities than that in small cities. In addition, different robustness tests, including continuity test, different bandwidth tests and alternative empirical model, are adopted to ensure the reliability of the conclusion. Finally, the authors put forward corresponding policy suggestions from the three dimensions of government, enterprises and residents.

First, regarding winter heating as a quasi-natural experiment, a regression discontinuity design method is introduced to investigate the relationship between winter heating and population mobility, which is helpful to avoid the estimation error caused by endogeneity. Second, the authors use the passenger travel “big data” based on the website of Tencent Location Big Data, which can effectively capture the daily characteristics of China's population mobility. Third, this study discusses the population mobility from the perspective of winter heating and researches population mobility before and after winter heating, which is helpful in enriching the research on population mobility.

Integrality of surface mesh is requisite for computational engineering. Nonwatertight meshes with holes can bring inconvenience to applications. Unlike simple modeling or visualization, the downstream industrial application scenarios put forward higher requirements for hole-filling, although many related algorithms have been developed. This study aims at the hole-filling issue in industrial application scenarios.

This algorithm overcomes some inherent weakness of general methods and generates a high-level resulting mesh. Initially, the primitive hole boundary is filled with a more appropriate triangulation which introduces fewer geometric errors. And in order for better performances on shape approximation of the background mesh, the algorithm also refines the initial triangulation with topology optimization. When obtaining the background mesh defining the geometry and size field, spheres on it are packed to determine the vertex configuration and then the resulting high-level mesh is generated.

Through emphasizing geometry recovery and mesh quality, the proposed algorithm works well in hole-filling in industrial application scenarios. Many experimental results demonstrate the reliability and the performance of the algorithm. And the processed meshes are capable of being used for industrial simulation computations directly.

This paper makes input meshes more adaptable for solving programs through local modifications on meshes and perfects the preprocessing technology of finite element analysis (FEA).

This paper aims to present a broad review of near-a titanium alloys for high-temperature applications.

Following a brief introduction of titanium (Ti) alloys, this paper considers the near-α group of Ti alloys, which are the most popular high-temperature Ti alloys developed for a high-temperature application, particularly in compressor disc and blades in aero-engines. The paper is relied on literature within the past decade to discuss phase stability and microstructural effect of alloying elements, plastic deformation and reinforcements used in the development of these alloys.

The near-a Ti alloys show high potential for high-temperature applications, and many researchers have explored the incorporation of TiC, TiB SiC, Y₂O₃, La₂O₃ and Al₂O₃ reinforcements for improved mechanical properties. Rolling, extrusion, forging and some severe plastic deformation (SPD) techniques, as well as heat treatment methods, have also been explored extensively. There is, however, a paucity of information on SiC, Y₂O₃ and carbon nanotube reinforcements and their combinations for improved mechanical properties. Information on some SPD techniques such as cyclic extrusion compression, multiaxial compression/forging and repeated corrugation and straightening for this class of alloys is also limited.

This paper provides a topical, technical insight into developments in near-a Ti alloys using literature from within the past decade. It also outlines the future developments of this class of Ti alloys.

In the big data era, image compression is of significant importance in today’s world. Importantly, compression of large sized images is required for everyday tasks; including electronic data communications and internet transactions. However, two important measures should be considered for any compression algorithm: the compression factor and the quality of the decompressed image. In this paper, we use Frei-Chen bases technique and the Modified Run Length Encoding (RLE) to compress images. The Frei-Chen bases technique is applied at the first stage in which the average subspace is applied to each 3 × 3 block. Those blocks with the highest energy are replaced by a single value that represents the average value of the pixels in the corresponding block. Even though Frei-Chen bases technique provides lossy compression, it maintains the main characteristics of the image. Additionally, the Frei-Chen bases technique enhances the compression factor, making it advantageous to use. In the second stage, RLE is applied to further increase the compression factor. The goal of using RLE is to enhance the compression factor without adding any distortion to the resultant decompressed image. Integrating RLE with Frei-Chen bases technique, as described in the proposed algorithm, ensures high quality decompressed images and high compression rate. The results of the proposed algorithms are shown to be comparable in quality and performance with other existing methods.