Search results

This study tested a holistic model that investigated the interaction effect of negative mentoring experiences and moqi (pronounced “mò-chee”) with a mentor—where moqi refers to a situated state between two parties in which one party understands and cooperates well with the other party without saying a word—on the protégés’ turnover intention, along with the mediating role of protégés’ harmonious work passion.

Data were collected from 281 protégés through a three-wave questionnaire survey with a 1-month lag between waves. We used a hierarchical multiple regression and bootstrapping analysis to test our hypotheses.

Our results support the mediating effect of harmonious work passion on the positive relationship between protégés’ negative mentoring experiences and turnover intention. In addition, our analysis confirmed that moqi with the mentor amplifies both the impact of protégés’ negative mentoring experiences on harmonious work passion and the indirect effect of negative mentoring experiences on protégés’ turnover intention via harmonious work passion.

By demonstrating the interaction effect of protégés’ negative mentoring experiences and moqi with their mentor on turnover intention, as well as the mediating role of harmonious work passion, this study expands our understanding of the mechanism and boundary condition of the effect of negative mentoring experiences and provides inspiration and guidance for mentoring practices.

This paper aims to improve the adaptability and control performance of the controller, a proposed seeker optimization algorithm (SOA) is introduced to optimize the controller parameters of a robot manipulator.

In this paper, a traditional proportional integral derivative (PID) controller and a fuzzy logic controller are integrated to form a fuzzy PID (FPID) controller. The SOA, as a novel algorithm, is used for optimizing the controller parameters offline. There is a performance comparison in terms of FPID optimization about the SOA, the genetic algorithm (GA), particle swarm optimization (PSO) and ant colony optimization (ACO). The DC motor model and the experimental platform are used to test the performance of the optimized controller.

Compared with GA, PSO and ACO, this novel optimization algorithm can enhance the control accuracy of the system. The optimized parameters ensure a system with faster response speed and better robustness.

A simplified FPID controller structure is constructed and a novel SOA method for FPID controller is presented. In this paper, the SOA is applied on the controller of 5-DOF manipulator, and the validation of controllers is tested by experiments.

The purpose of this paper is to identify measure and prioritise the perceived importance of supply chain issues within the automotive industry related to information flow during product development (PD).

This study analyses empirical data captured from semi-structure interviews with 15 multinational companies operating in the automotive sector. Data collected are analysed using a standard methodology identified from the literature. The individual issues captured are classified against 14 clusters that represent the core and the fundamental supply chain issues of information flow.

This study showed that half of the issues captured are related to the inadequate information systems used. The cluster that had the majority of individual issues is related to suppliers that are not directly connected with their customers through an enterprise system. However it was identified that two fundamental clusters justify the decision of not being directly connected. Implementing and maintaining multiple enterprise systems can be a big overhead for multinational companies working with a high number of customers.

Although several studies have proved the benefits that can be obtained through supply chain collaboration, there are relatively little empirical studies that seek to explore the understanding of supply chain issues in regards to information flow especially during PD. By identifying, measuring and prioritising the importance of supply chain issues this study provides researchers and practitioners guidance in developing better tools and defining more efficient processes.

Since its inception in 2009, the growth of real-time bidding (RTB) advertising has been dramatic. Yet, there is a dearth of research in the information system (IS) literature despite the potential for negative e-commerce outcomes. The purpose of this paper is to identify salient antecedents of users’ attitude toward RTB advertisements.

A research model was constructed and tested with data from 437 respondents. SmartPLS 3.0, a partial least square (PLS) structural equation modeling (SEM) tool, was used to evaluate the research model and test the hypotheses.

The findings indicate that user attitude is determined by opposing influences from the cognitive and affective attributes of an RTB advertisement. A surprise is found to elicit greater perception of advertisement personalization, timeliness and relevance, as well as privacy and intrusiveness concerns. While RTB advertisement relevance appears to lessen the effect of advertisement intrusiveness, privacy concern is exacerbated when the advertisement is more personalized. The authors discuss the implications of this study for click-through intentions and e-commerce.

At this point in the evolution of RTB advertising, the findings indicate that the surprise generated by the appearance of an RTB advertisement is not currently a “bad” surprise. In addition, the formation of positive user attitude toward RTB is complex because cognitive factors interact with users' concerns to strengthen or weaken the negative effects. The authors also demonstrate that attitude and stimulus–organism–response (S–O–R) theories are useful theoretical bases for the development of causal models to predict RTB attitude and click-through intentions.

This paper aims to predict the 28-day compressive strength of recycled thermal insulation concrete more accurately.

The initial weights and thresholds of BP neural network are improved by genetic algorithm on MATLAB 2014 a platform.

Genetic algorithm–back propagation (GA-BP) neural network is more stable. The generalization performance of the complex is better.

The GA-BP neural network based on the training sample data can better realize the strength prediction of recycled aggregate thermal insulation concrete and reduce the complex orthogonal experimental process. GA-BP neural network is more stable. The generalization performance of the complex is better.

This study aims to investigate the noise-inducing characteristics during the start-up process of a mixed-flow pump and the impact of different start-up schemes on pump noise.

This study conducted numerical simulations on the mixed-flow pump under different start-up schemes and investigated the flow characteristics and noise distribution under these schemes.

The results reveal that the dipole noise is mainly caused by pressure fluctuations, while the quadrupole noise is mainly generated by the generation, development and breakdown of vortices. Additionally, the noise evolution characteristics during the start-up process of the mixed-flow pump can be divided into the initial stage, stable growth stage, impulse stage and stable operation stage.

The findings of this study can provide a theoretical basis for the selection of start-up schemes for mixed-flow pumps, reducing flow noise and improving the operational stability of mixed-flow pumps.

Organic solar cells have potential as an alternative to conventional inorganic solar cell due to low processing cost, flexibility and easy fabrication technique.

The goal of this paper is to study the characteristics of the CuPc and PCBM based organic solar cell by introducing a thin layer of Ag at the interface of donor (CuPc) and Acceptor (PCBM), their photovoltaic and optical properties were investigated. The heterojunction solar cells with and without silver inter layer were fabricated through thermal deposition in HR vacuum. The OPV solar cells were characterized using current-voltage graphs, absorbance spectrum and Impedance spectroscopy. Impedance spectroscopy was taken to identify the traps using series resistance, parallel resistance, and Impedance spectrums under different frequencies. Optical behaviors of these devices have been investigated with absorbance spectrum.

Introducing Ag to interfacing point produced traps and these traps causes to decreased Voc, Isc, FF, and efficiency. The effect of silver layer at donor acceptor interface was studied.

As an important participant in capital market, institutional investors play a principal role in improving corporate governance. Most existing studies have focused on institutional ownership and its economic consequences. Nevertheless, they have not provided sufficient insight on the governance behavior of institutional investors as well as the underlying incentive mechanism. This paper aims to analyze the governance role of institutional investors in information disclosure and provide related evidence.

The authors propose a novel theory to analyze the institutional investors’ behavior of active governance and shows that such behavior significantly improves the quality of corporate information disclosure. The authors then conduct an empirical test by using the hand-collected data of institutional investors’ corporate visits during 2009-2014 in ChiNext.

This paper finds that the firms visited by institutional investors are more likely to have a greater tendency of disclosing more information than the firms that have never been visited. In particular, a higher frequency of visits or a larger number of participating institutional investors leads to a higher degree of disclosure. Consistent with the notion that on-site visits endow institutional investors with more frequent and active interaction with the firms, the authors find that the results are stronger for firms which are visited on-site, when compared with other information acquisition activities such as online meetings, conference calls and investor meetings. In addition, the effect of a site visit is greater when the site visit is conducted by securities companies or funds rather than insurance companies or QFIIs. Finally, the test of the direction of causality suggests that visits conducted by institutional investors leads to more information disclosure, rather than the reverse. Collectively, these results show that institutional investors’ participation enhances corporate information disclosure.

This paper explores the internal mechanism that institutional investors affect corporate governance by improving information disclosure through their corporate visits. This is the first study to investigate the influence of institutional investors’ corporate visits and their economic consequences.

The purpose of this study is to develop a modified parameter identification method and a novel measurement method to calibrate a 3 degrees-of-freedom (3-DOF) parallel tool head. This parallel tool head is a parallel mechanism module in a five-axes hybrid machine tool. The proposed parameter identification method is named as the Modified Singular Value Decomposition (MSVD) method. It aims to overcome the difficulty of choosing the algorithm parameter in the regularization identification method. The novel measurement method is named as the vector projection (VP) method which is developed to expand the measurement range of self-made measurement implements.

Newton Iterative Algorithm based on Least Square Method is analyzed by using the Singular Value Decomposition method. Based on the analysis result, the MSVD method is proposed. The VP method transforms the angle measurement into the displacement measurement by taking full advantage of the ability that the 3-DOF parallel tool head can move in the X – Y plane.

The kinematic calibration approach is verified by calibration simulations, a Rotation Tool Center Point accuracy test and an experiment of machining an “S”-shaped test specimen.

The kinematic calibration approach with the MSVD method and VP method could be successfully applied to the 3-DOF parallel tool head and other 3-DOF parallel mechanisms.

The purpose of this paper is to build a transient wear prediction model of surface topography of textured work roll, and then to investigate the wear performance of different original textured surfaces. The surface topography of steel sheets is one of the most important surface quality indexes, which is inherited from the textured work rolls in cold rolling. Surface topography of work roll is obviously changing in the cold rolling process. However, surface topography is difficult to measure in the industry production process.

This paper presents a numerical approach to simulate the wear process based on the mixed lubrication model of cold rolling interface developed by Wilson and Sheu (Sheu and Wilson, 1994). It is assumed that wear takes place at locations where the surfaces are in direct contact, and the volume is removed by an abrasive particle which is an abstract concept based on the wear phenomenon of textured work roll. At each simulation cycle, the distribution of the contact pressure is calculated by the lubrication model. The material is removed by an abstract abrasive particle and the surface topography is modified correspondingly. The renewed surface topography is then used for the next cycle.

Through comparative analysis, it can be found that the simulation results possess similar statistical characteristic with the measured data. A set of roughness parameters such as the amplitude, spacing and frequency-domain characteristics are introduced to analyze the wear performance of different textured surfaces. Numerical examples show that the surface topography has a significant effect on the wear performance of work roll in cold rolling.

The proposed model can accurately predict the wear process of the surface topography in the cold rolling process, which provides the foundation for optimization of original surface topography of textured work roll. The model can also be considered as a tool applicable for research on control of the surface topography of steel strip in the cold rolling process.