Search results

The purpose of this paper is to propose a new method that allows to compare the magnetic pressures of different pulse width modulation (PWM) strategies in a fast and efficient way.

The voltage harmonics are determined using the double Fourier integral. As for current harmonics and waveforms, a new generic model based on the Park transformation and a dq model of the machine was established taking saturation into consideration. The obtained analytical waveforms are then injected into a finite element software to compute magnetic pressures using nodal forces.

The overall proposed method allows to accelerate the calculations and the comparison of different PWM strategies and operating points as an analytical model is used to generate current waveforms.

While the analytical expressions of voltage harmonics are already provided in the literature for the space vector pulse width modulation, they had to be calculated for the discontinuous pulse width modulation. In this paper, the obtained expressions are provided. For current harmonics, different models based on a linear and a nonlinear model of the machine are presented in the referenced papers; however, these models are not generic and are limited to the second range of harmonics (two times the switching frequency). A new generic model is then established and used in this paper after being validated experimentally. And finally, the direct injection of analytical current waveforms in a finite element software to perform any magnetic computation is very efficient.

This paper deals with the study of the influence of the phase shift between currents and back-electromotive forces (back-EMF) on torque ripple and radial magnetic forces for a low power synchronous machine supplied with 120 degrees square-wave currents. This paper aims to establish a good compromise between efficiency, harmonics of torque and harmonics of radial forces at the origin of the electromagnetic noise.

Based on a finite element approach, torque and magnetic pressure harmonics versus space and frequency are evaluated for different angle values. The evolutions of the different harmonics against the load angle are analyzed and compared to those of experimental measurements.

Depending on the load torque, field-weakening or field-boosting can be used to reduce current harmonics contributing the most to the radial magnetic forces responsible for the noise. Besides, a compromise can be found to avoid deteriorating too much the performances of the machine, thus being suitable with an industrial application.

This study concerns low power permanent magnet synchronous machines with concentrated windings and driven with a trapezoidal control, while having sinusoidal back-EMF.

The use of a simple mean and suitable with a large-scale manufacturing industry to reduce the identified electromagnetic-borne noise of a specific electric drive makes the originality.